Vacmobile systems and supplies SOLD HERE!
Proven in aviation, general industry, marine and wind energy applications, Vacmobiles offer manufacturers of composites:
Complete ready-to-go vacuum systems right out of the box (with vacuum pump, integral resin trap, vacuum level control, vacuum guage and easy to use leak tight vacuum connections - all in a compact, mobile and hassle-free package)
Single phase and mobile - use almost anywhere
Amazing effectiveness for their size, with single machines infusing 2000ft2 (185m2 of bag)
Consumable cost savings and less floor clutter - because their mobility allows very short vacuum lines to be used.
Lower cost, greater versatility and generally better in-bag vacuum than central vacuum systems
Reduced energy consumption compared with central systems
Flexibility of ownership - just add or delete machines as needs change. Very easy to relocate.
Vacmobiles 20 / 2 system Collapsed (How it will arrive in the box)
With only 1 simple knob to turn, assembly is simple and FAST!
Fully assembled shown below.
Vacmobiles Accessories / Supplies
Primary uses: Composite manufacturing processes such as resin infusion and vacuum bagging. The Vacmobile 20/2 is also an ideal vacuum source for most vacuum clamping and lifting duties.
Special features: The Infusion 20/2 system is complete with an integral resin trap and provides excellent performance from a compact package. All vacuum joints are very heavy duty to ensure vacuum integrity over a long working life. The machine's normal working height can be reduced to 23.7" for transport in most cars or trucks, making it ideal for transport between different work locations or for off-site repair work.
Dimensions Length: 18.5" Width: 15.4"
Normal working height: 40.2" Transport height: 23.7"
Weight: 87 lbs
Vacuum pump: Becker U.20. 50 Hz capacity 18 m3/h (10.6 cfm). 60 Hz capacity 21 m3/h (12.4 cfm)
Vacuum level: Adjustable from 50% vacuum to 99% vacuum (10 mbar, 8 Torr, 29.6" Hg, -14.5 psi)
Resin catch pot: 4.2 US pints
Vacuum ports: 2 resin trap mounted ports for resin infusion and vacuum bagging. These ports suit:
½" , 5/8" or 23mm OD polyethylene tubing (using O-rings and gland nuts)
½" or ¾" ID vacuum hose (using aluminium adapting tube and O-ring sealed glands)
½" threaded connections (direct into brass sockets)
Power supply: Either 230 V/50 Hz or 110 V/60 Hz, single phase
Accessories: Vacuum clamping port, complete with dust filter, L-port valve and ¾" male Camlock connection. The L-port valve allows rapid vacuum release and automatic reverse flow filter cleaning in dusty applications
Optional Clamping port:
Additional Vacuum gauges:
Dual vacuum adapter:
Vacuum leak detector:
Vacmobiles accessories:
Bag accessory:
Fitting accesories:
Shut-off valves:
Vacuum needles:
